NEM 658 PluX 22 digitalization board kit and lighting strip for X2800 Roco 1st génération

Printed circuit with DCC NEM 658 PluX22 socket, 8 independent functions to equip the 1st generation Roco X2800. The first generation X2800 is not originally equipped with an 8-pin decoder socket.

This board equipped with a PluX22 decoder provides 8 functions (F0F, F0R, AUX1, AUX2, AUX3, AUX4, AUX5, AUX6).

You can control the lights independently with 4 functions (F0F, F0R, AUX1, AUX2).

You have 4 functions left (AUX3, AUX4, AUX5, AUX6), 2 at each end to control other lights or accessories, see list below.

• cabin lighting
• electric uncoupler
• etc...

Lighting strip for X2800 Roco railcar. Simple to install, the strips can be used under 2-rail or 3-rail power supply. Not equipped with a decoder connector or an integrated decoder, it can nevertheless be used in analog or digital mode.

To better understand the NEM658 aka PluX standard, we invite you to download the PDF available opposite.

Complete instructions illustrated with numerous color photos.

Please note when using an MPPE board, you must program the decoder to have access to the light control functions independently. As this task is quite tedious with most control centers, we offer decoders, sound or not, pre-programmed, ready to use.

To do this, remember to choose the "MPPE programming" option located at the bottom of the description of the item chosen in the "Digital / Decoders" or "Digital/Pre-programmed decoders" section or an MPPExxx sound decoder reference in the "Digital" section /Sound decoders" or "Digital/Programmed sound decoders"

This range of products received the Model of the Year 2017 New Technologies diploma from the FFMF

Similar to the old production of Miniatures Passion under the reference MPPE476 or MPPE476-ER